Specifications

  • Type
    Digital Input/Output Module
  • Number of Inputs
    12
  • Input Type
    Sink or Source
  • Number of Outputs
    12
  • Power Consumption
    @ 200mA ≥ 24V_IO@ 2.5Amp, 24V_CORE@ 0.15Amp (per module) Assuming all DOs are loaded
  • Input Isolation
    2.5 kVrms
  • DI refresh rate
    10µs or 1ms
  • Debounce Filter
    Fixed to 4 cycles of DI Refresh Rate (10.8 µsec)
  • Logic Level
    24 VDC (8VDC - 30 VDC)
  • Maximum update rate
    25 µSec
  • Output Type
    Open collector sink/source
  • Protection
    ESD to IEC 1000-4-2 ±4kV contact, DC + 5% (each channel)
  • Pull Up/Down Value
    22K
  • Sink Input Logic Level
    24VDC ±5%
  • Sink Input Nominal Load Impedance
    6 kOhm
  • Sink Input Current, Maximum OFF
    2.25mA (10.7 V)
  • Sink Input Current, Minimum ON
    3.3mA (4.5 V)
  • Sink Input Current, Maximum ON
    4.7mA
  • Sink Output Maximum thermal current limit (ON)
    2A per bank of 6
  • Sink Output Maximum Available Current Sink (ON)
    200mA
  • Sink Output Maximum Leakage Current (OFF)
    0.1mA (output tied to 24v)
  • Sink Output Maximum Voltage Drop (ON)
    Maximum 1.1v @ 200mA
  • Sink Output Minimum Thermal Current Limit (ON)
    1A per bank of 6
  • Sink Output Maximum Inductive Load Energy, 1Hz Cycled
    60mJ
  • Source Input Logic level
    24v
  • Source Input High Voltage Range OFF
    12.8V (2.15 mA)
  • Source Input Low Voltage Range ON
    15V (2.5 mA)
  • Source Input Input Current, Maximum ON
    4.7mA
  • Source Input Nominal Load Impedance
    6 kOhm
  • Source Output Maximum Available Current Source (ON)
    200mA
  • Source Output Maximum Thermal Current Limit (ON)
    2A per bank of 6
  • Source Output Maximum Leakage Current (OFF)
    0.1mA (output tied to ground)
  • Source Output Minimum Thermal Current Limit (ON)
    1A per bank of 6
  • Source Output Output High Voltage
    Minimum 23.7V @ 200mA
  • Source Output Maximum Inductive Load Energy, 1Hz Cycled
    60mJ
  • Operating Temperature
    0 to 55°C, with 2°C upper limit reduction per 1000 ft above sea level
  • Storage Temperature
    -40°C to 85°C
  • Altitude
    0-10,000 ft above sea level
  • Humidity
    5-85% non-condensing
  • Dimensions
    35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 inches) (W x H x D)
  • Mounting
    DIN rail

Resources

Literature

Manuals

Drawings & CADs

Need help?

Contact an Applications Specialist by sending us an email