Digital Power Supply, Display, 2 Channels, RS232, ±15 VDC, 0.75 Amp
Model: PDR2000AO
Digital Power Supply, Display, 2 Channels, RS232, ±15 VDC, 0.75 Amp
Digital Power Supply, Display, 2 Channels, RS232, ±15 VDC, 0.75 Amp
Model: PDR2000AO
Overview
Overview
The PDR2000AO Two-Channel Digital Power Supply and Readout is a versatile, low cost solution for powering and displaying up to two (2) Baratron® transducers. Both instruments are simultaneously powered, so users may alternate between readings with the press of a button. Readings are also available on demand via the RS-232 interface. Two process relay trip points are available and may be assigned to either manometer. Upper and lower settings allow complete control over the hysteresis of the control trip point.
Technical Specs
-
TypePower Supply and Readout
-
Display4 digits (9999) Red LED
-
Channels2
-
Output Power±15 VDC @ 750 mA
-
Output SignalAnalog:
0-5VDC output each channel (0.5VDC per decade (based on displayed value)
0-10VDC each channel (duplicate of the input)
Digital:
RS232 (9600 baud, 8 data bits, no parity, 1 stop bit) -
Trip Points2, assignable to either channel
-
UseMKS Baratron® Transducers and Mass Flow controllers
-
Measurement Range0.01 mTorr to 10.00 kTorr
-
ControlsGauge Select, Full Scale Adjust, Calibrate, Zero, Set Point 1 High, Set Point 1 Low, Set Point 2 High, Set Point 2 Low, Torr/mbar Select
-
Operating Temperature2 - 50°C
-
Weight1 lb.
-
Dimensions3.80 x 1.85 x 7.0 in. (95 x 47 x 175 mm)(width x height x depth)
-
MountingStandard 0.125 in. DIN enclosure
-
ComplianceCE
Resources & Downloads
Drawings & CADs
- PDR2000A Vaccum Gauge Controller Dimensional Drawing (49.8 kB, PDF)
Digital Power Supply, Display, 2 Channels, RS232, ±15 VDC, 0.75 Amp
Ultra-High Velocity