MultiGas™ 2030 CEM
Model: MULTIGAS-2030-CEM
MultiGas™ 2030 CEM
Model: MULTIGAS-2030-CEM
Overview
Overview
MultiGas™ CEM, Continuous Emissions Monitoring
The MultiGas™ 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas mixtures. The MultiGas™ 2030 analyzer contains a 2102 Process FTIR Spectrometer, a patented, high-optical-throughput sampling cell, applications-specific analysis software, and an instrument-independent, quantitative spectral library. It incorporates a novel long wavelength thermoelectrically (TE) cooled detector for more accurate, highly sensitive measurement of most gases and vapors in high moisture streams (up to 40%), producing high resolution spectra (0.5cm-1), enabling detection and measurement of components such as SO2, NO2 and NO, without removing the moisture.
Applications
The Model 2030 CEM is designed for integration with complete continuous emissions monitoring systems to measure gaseous emissions from stationary sources such as:
- Waste incinerators
- Power plants
- Cement kilns
- Large combustion plants
- Turbine engines
Technical Specs
- TypeFTIR Analyzer
- Measurement TechniqueFTIR Spectrometry
- Measurable Gases & VaporsEmission species including: NO, NO2, N2O, SO2, CO, CO2, CH4, HCl,HF, NH3 and H2O
- Spectral Resolution0.5 cm-1
- Scan Time60 seconds
- Infrared SourceSilicon Carbide @ 1200°C
- Reference LaserHelium Neon (15798.2 cm-1)
- DetectorThermoelectrically (TE) cooled MCT (HgCdTe)
- Purge Pressure20 psig (1.5 bar) max.
- Spectrometer Purge Flow0.2 L/min of dry nitrogen or CO2 free clean dry air with dewpoints below -70°C
- Pressure TransducerMKS Baratron Capacitance Manometer
- Purge Connection0.25 in. Swagelok quick connect
- Computer RequirementsWindows 10/11 (32 bit or 64 bit versions); Intel Core i3 1.60Ghz; 4GB RAM; 10GB of free hard drive disk space; 1920x1080, 32 bit color, at least 1080 vertical display
- CommunicationRJ45 Crossover Ethernet, TOOLweb (HTML based), OPC, Modbus TCP/IP
- Enclosure19 in. rack mount chassis
- Dimensions17.5 x 12.5 x 25.5 in. (width, height, depth)
- Power Requirements120 or 240 VAC, 50/60 Hz, 3 amps
- Weight110 lbs. (50 kg)
- Sample Temperature191°C
- Sample Flow1 L/min
- Sample Pressure1 atm ±0.05
- Gas Cell MaterialsNickel coated Al
- Fittings0.25 in. Swagelok
- TubingHeated 0.25 in. stainless steel
- MirrorsNickel plated aluminum substrate, with rugged gold coating
- WindowsBaF2
- O-ringsViton
Technical Specs
- TypeFTIR Analyzer
- Measurement TechniqueFTIR Spectrometry
- Measurable Gases & VaporsEmission species including: NO, NO2, N2O, SO2, CO, CO2, CH4, HCl,HF, NH3 and H2O
- Spectral Resolution0.5 cm-1
- Scan Time60 seconds
- Infrared SourceSilicon Carbide @ 1200°C
- Reference LaserHelium Neon (15798.2 cm-1)
- DetectorThermoelectrically (TE) cooled MCT (HgCdTe)
- Purge Pressure20 psig (1.5 bar) max.
- Spectrometer Purge Flow0.2 L/min of dry nitrogen or CO2 free clean dry air with dewpoints below -70°C
- Pressure TransducerMKS Baratron Capacitance Manometer
- Purge Connection0.25 in. Swagelok quick connect
- Computer RequirementsWindows 10/11 (32 bit or 64 bit versions); Intel Core i3 1.60Ghz; 4GB RAM; 10GB of free hard drive disk space; 1920x1080, 32 bit color, at least 1080 vertical display
- CommunicationRJ45 Crossover Ethernet, TOOLweb (HTML based), OPC, Modbus TCP/IP
- Enclosure19 in. rack mount chassis
- Dimensions17.5 x 12.5 x 25.5 in. (width, height, depth)
- Power Requirements120 or 240 VAC, 50/60 Hz, 3 amps
- Weight110 lbs. (50 kg)
- Sample Temperature191°C
- Sample Flow1 L/min
- Sample Pressure1 atm ±0.05
- Gas Cell MaterialsNickel coated Al
- Fittings0.25 in. Swagelok
- TubingHeated 0.25 in. stainless steel
- MirrorsNickel plated aluminum substrate, with rugged gold coating
- WindowsBaF2
- O-ringsViton