LDM-A and LDM-D Local Pressure Display Modules
Overview
LDM local display modules are designed to be used with many MKS 700 and 800 Baratron® pressure transducers for local display of pressure in real time and in your specified engineering units. Installed "in line" between the pressure transducer and host system/power supply, no additional cabling is required.
- Large red LED or LCD displays for easy reading, even from a distance
- LDM-D offers user-configurable engineering units
- No additional cables needed
- Small size allows placement on individual gas sticks
Products
| Compare | Description | Drawings, CAD & Specs | Availability | Price | |||
|---|---|---|---|---|---|---|---|
|
Local Display Module, 1000 Torr, Absolute Calibration, 0-10 VDC, DB9, Transducer Mounted
$508
|
LDM-A13TA2AA1 Local Display Module, 1000 Torr, Absolute Calibration, 0-10 VDC, DB9, Transducer Mounted | $508 |
|
|||
|
|
Local Display Module, 3000 PSI, Absolute Calibration, 0-5 VDC, 15-pin HD, Transducer Mounted
$508
|
LDM-A33PA3CC1 Local Display Module, 3000 PSI, Absolute Calibration, 0-5 VDC, 15-pin HD, Transducer Mounted | $508 |
|
|||
|
|
Local Display Module, 250 PSI, Compound Calibration, 4-20 mA, Bendix, Panel Mount
$580
|
LDM-ARDPC4DD2 Local Display Module, 250 PSI, Compound Calibration, 4-20 mA, Bendix, Panel Mount | $580 |
|
|||
|
|
Local Display Module, 100 PSI, Absolute, 0-10 VDC, 15-pin HD, Adjustable Units
$483
|
LDM-D12PA2CC1 Local Display Module, 100 PSI, Absolute, 0-10 VDC, 15-pin HD, Adjustable Units | $483 |
|
Configuration Options
Please see datasheet for product options.
Specifications
-
DisplayLDM-A: 3.5 place red LED, 7-segment, 0.37 in. tall
LDM-D: 4 place red LED, 16-segment, 0.5 in. tall. -
Display UnitsLDM-A: psi, in Hg, mm Hg (Torr), bar, Pa, or in H2O
LDM-D: PSIA with front-panel switch for kPa, bar, or mmHg/Torr -
Number of Channels1
-
Input SignalLDM-A: 0-5 VDC, 0-10 VDC, 4-20 mA
LDM-D: 0-10 VDC
-
Output SignalLDM-A: 0-5 VDC, 0-10 VDC, 4-20 mA
LDM-D: 0-10 VDC -
Operating Temperature0° to 50°C
-
ComplianceEMC Directive 2014/30/EU
Features
LDM-A Version Features
The LDM-A model uses advanced analog electronics, and has a 9-pin D-subminiature, 15-pin high density D-subminiature, or Bendix® electrical connector that can mount directly to the mating electrical connectors of MKS 740B, 742B, 750B, 752B, 840B, 842B, 850B, 852B, 870B, 872B, AA07A and AA08A Baratron pressure transducers. For applications with space constraints around the gas line, it can also be panel-mounted remotely and connected to the transducer via a separate cable. Pressure ranges from 10 Torr to 3000 PSI are available, as are a wide range of options to allow custom configuration to nearly any requirement. Versions with 0-10 VDC or 0-5 VDC output have a high-visibility red LED display and operate on +13 to 32VDC input power, while models with 4-20 mA output signal use a large LCD display and require +13 to 36 VDC excitation.
LDM-D Version Features
The LDM-D is a low-cost model that uses microprocessorcontrolled electronics to generate a brilliant red LED display that can be easily switched to show the transducer’s pressure in alternate engineering units such as bar, kPa, and Torr/mm Hg. The LDM-D operates on input voltages of +12 to +32 VDC, and it has a 0-10 VDC output.
The LDM-D also can be mounted directly to compatible MKS 740B, 742B, 750B, 752B, 840B, 842B, 850B, 852B, 870B, 872B, AA07A and AA08A Baratron pressure transducers without requiring a separate power and signal cable to the host assuming that the transducer has a 15-pin high-density D-subminiature electrical connector. Pressure ranges of 1000 Torr (absolute), 60 PSIA, and 100 PSIA are available, as is mounting hardware to permit remote panel mounting and cables to connect to the pressure transducer.
Resources
Manuals
- LDM-A Local Display Module Manual (327.8 kB, PDF)
Literature
- LDM Local Display Module for Pressure Transducers (175.5 kB, PDF)
Drawings & CADs
- LDM-A, LDM-D Local Display Module Dimensional Drawings (47.8 kB, PDF)
Ultra-High Velocity