Specifications

  • Type
    Digital Pressure Transducer
  • Sensor Type
    Capacitance Manometer
  • Measurement Type
    Absolute
  • Sensor Temperature
    Controlled to 45°C, 80°C or 100°C
  • Full Scale Pressure Ranges
    0.1, 0.25, 1, 2, 10, 20, 50, 100, 200, 500, and 1000 Torr (and metric equivalents)
  • Accuracy
    45°C Models: 0.10% of Reading for ranges ≥1 Torr, 0.15% Reading for ranges <1 Torr
    80° and 100°C Models: 0.25% of Reading for ranges ≥1 Torr, 0.50% of Reading for ranges <1 Torr
  • Resolution
    0.001% Full Scale
  • Communication Protocol
    EtherCAT®
  • Analog Output
    0 - 10 VDC into >10Ω load
  • Analog Connector
    15-pin D-subminiature male
  • Digital Connector
    Two (2) RJ45 female receptacles for incoming and network signals
  • Zero Temperature Coefficient
    45°C Models:0.002% Full Scale/°C for ranges ≥1 Torr; 0.005% Full Scale/°C for ranges <1 Torr
    80° and 100°C Models: 0.002% Full Scale/°C for ranges ≥1 Torr; 0.010% Full Scale/°C for ranges <1 Torr
  • Span Temperature Coefficient
    0.02% Reading/°C
  • Ambient Operating Temperature
    45°C Models: 15° to 40°C
    80° and 100°C Models: 15° to 50°C
  • Volume
    6.3 cc
  • Warm-up Time
    2 hours for ranges ≥1 Torr
    4 hours for ranges <1 Torr
  • Overpressure Limit
    45 psia (310 kPa)
  • Materials Exposed to Process Gases
    Inconel® and Incoloy® nickel alloys
  • Power Requirements
    +24 VDC ±10% (Unheated 300mA, 45°C Models 600 mA, 80° and 100°C Models 800 mA)
    ±15VDC ±5% (Unheated 300mA, 45°C Models 600 mA, 80° and 100°C Models 800 mA)
  • Compliance
    2014/30/EU, 2011/65/EU

Resources

Need help?

Contact an Applications Specialist by sending us an email