Sorry, this product is no longer offered for sale.
MultiGas™ 2030 CEM HiSens
Model: MULTIGAS-2030-CEM-HISENS
MultiGas™ 2030 CEM HiSens
Model: MULTIGAS-2030-CEM-HISENS
Overview
Overview
MultiGas™ CEM HiSens, Low Level Continuous Emissions Monitoring
The MultiGas™ 2030 CEM HiSens is an FTIR-based gas analyzer designed for continuous monitoring of very low emissions in effluent streams containing up to 40% of water and CO2.
Technical Specs
- TypeFTIR Analyzer
- Measurement TechniqueFTIR Spectrometry
- Measurable Gases & VaporsEmissions at very low levels, including HCl, HF, formaldehyde, N2O, CH4, CO2, H2O
- Measurable RangeHCl Detection Range: limit is 30 ppb and recommended range is 0 - 3 ppm, HF, Formaldehyde, N2O, CH4, CO Detection Range: Limit is 10's of ppb and recommended range is application dependent.
- Spectral ResolutionMinimum of 0.58 cm-1
- Scan Time60 seconds
- Infrared SourceSilicon Carbide Laser Helium Neon
- DetectorThermoelectrically (TE) cooled MCT (HgCdTe) Purge Pressure 20 psig (1.5 bar) max.
- Spectrometer Purge Flow0.2 L/min of dry nitrogen or CO , free clean, dry air with dewpoint below -70°C
- Pressure TransducerMKS Baratron Capacitance Manometer
- Purge Connection0.25 in. Swagelok quick connect
- Computer RequirementsMinimum: Desktop or notebook Intel Pentium PC under Microsoft Windows XP, display (1024 x 768), Recommended: Intel Pentium III, 850 MHz, Microsoft Windows XP, 256 MB
- CommunicationRJ45 Crossover Ethernet, TOOLweb (HTML based - included), OPC, Modbus TCP/IP (not included)
- Enclosure19 in. Rack mount chassis
- Dimensions17.5 x 12.5 x 25.5 in. (width, height, depth)
- Power Requirements120 or 240 VAC, 50/60 Hz, 3 amps
- Weight110 lbs. (50 kg)
- Sample Temperature191°C
- Sample Flow0.5 - 5 L/min
- Sample Pressure1 atm ±0.05
- Gas Cell MaterialsNickel-coated Al
- Fittings0.25 in. threaded Swagelok
- TubingHeated 0.25 in. stainless steel
- MirrorsNickel plated aluminum substrate, with rugged MgF2-gold coating
- WindowsCaF
- O-ringsKalrez
Technical Specs
- TypeFTIR Analyzer
- Measurement TechniqueFTIR Spectrometry
- Measurable Gases & VaporsEmissions at very low levels, including HCl, HF, formaldehyde, N2O, CH4, CO2, H2O
- Measurable RangeHCl Detection Range: limit is 30 ppb and recommended range is 0 - 3 ppm, HF, Formaldehyde, N2O, CH4, CO Detection Range: Limit is 10's of ppb and recommended range is application dependent.
- Spectral ResolutionMinimum of 0.58 cm-1
- Scan Time60 seconds
- Infrared SourceSilicon Carbide Laser Helium Neon
- DetectorThermoelectrically (TE) cooled MCT (HgCdTe) Purge Pressure 20 psig (1.5 bar) max.
- Spectrometer Purge Flow0.2 L/min of dry nitrogen or CO , free clean, dry air with dewpoint below -70°C
- Pressure TransducerMKS Baratron Capacitance Manometer
- Purge Connection0.25 in. Swagelok quick connect
- Computer RequirementsMinimum: Desktop or notebook Intel Pentium PC under Microsoft Windows XP, display (1024 x 768), Recommended: Intel Pentium III, 850 MHz, Microsoft Windows XP, 256 MB
- CommunicationRJ45 Crossover Ethernet, TOOLweb (HTML based - included), OPC, Modbus TCP/IP (not included)
- Enclosure19 in. Rack mount chassis
- Dimensions17.5 x 12.5 x 25.5 in. (width, height, depth)
- Power Requirements120 or 240 VAC, 50/60 Hz, 3 amps
- Weight110 lbs. (50 kg)
- Sample Temperature191°C
- Sample Flow0.5 - 5 L/min
- Sample Pressure1 atm ±0.05
- Gas Cell MaterialsNickel-coated Al
- Fittings0.25 in. threaded Swagelok
- TubingHeated 0.25 in. stainless steel
- MirrorsNickel plated aluminum substrate, with rugged MgF2-gold coating
- WindowsCaF
- O-ringsKalrez
Resources & Downloads
Literature
MultiGas™ 2030 1065-Ready HiSens (archived)(143 kB, PDF)