Heated Capacitance Manometer w/Etch Sensor, 0.05 Torr, 45°C, 8 VCR-F, DB15 w/Thread Lock, 0.50%/Rdg Accuracy, Vertical Calibration
Model: E29HU5TBFL1B
Heated Capacitance Manometer w/Etch Sensor, 0.05 Torr, 45°C, 8 VCR-F, DB15 w/Thread Lock, 0.50%/Rdg Accuracy, Vertical Calibration
Heated Capacitance Manometer w/Etch Sensor, 0.05 Torr, 45°C, 8 VCR-F, DB15 w/Thread Lock, 0.50%/Rdg Accuracy, Vertical Calibration
Model: E29HU5TBFL1B
Overview
Overview
The E29HU5TBFL1B Baratron® Ethernet-Enabled, 100°C Heated Absolute Capacitance Manometer, with an Etch Sensor features 0.05 Torr full scale pressure measurement with 0.5% accuracy, vertical calibration, and a Swagelok® 8 female VCR® fitting. It has efficient temperature control electronics to provide superior long-term stability and repeatability. Based on the well-established Baratron capacitance manometer technology, the sensor’s wetted surfaces are Inconel® for corrosion resistance. The modern stainless steel enclosure provides a cleanroom compatible product. The E29H is fully compatible with earlier MKS 629 and E29 Baratron capacitance manometers, as well as many competitive products.
Technical Specs
-
TypeVacuum/pressure Transducer
-
Measurement TypeAbsolute
-
Sensor Temperature100°C
-
Full Scale Range0.05 Torr
-
Accuracy0.5% of Reading
-
Resolution0.002% of Full Scale
-
Fitting Type8 VCR female
-
Analog Output0-10 VDC
-
Analog Connector9-pin D-sub with Thread Locks
-
CalibrationVertical
-
Zero Temperature Coefficient0.02% of Full Scale/°C
-
Span Temperature Coefficient0.02% of Reading/°C
-
Operating Temperature Range15-40°C
-
Volume6.3 cc
-
Warm-up Time4 hours
-
Overpressure Limit45 psia (310 kPa)
-
Exposed MaterialsInconel®
-
Power Requirements±15 VDC ±5% @ 0.5 Amps
-
IndicatorsNo
-
ComplianceCE
Resources & Downloads
Drawings & CADs
- E29 Dimensional Drawing (126.9 kB, PDF)
Heated Capacitance Manometer w/Etch Sensor, 0.05 Torr, 45°C, 8 VCR-F, DB15 w/Thread Lock, 0.50%/Rdg Accuracy, Vertical Calibration
Ultra-High Velocity