Sorry, this product is no longer offered for sale. The recommended replacement product is AD06A.
120AD Baratron® 1-25000 Torr, 45°C Heated Reference Differential Capacitance Manometer
Model: 120AD-00100RCU
120AD Baratron® 1-25000 Torr, 45°C Heated Reference Differential Capacitance Manometer
Model: 120AD-00100RCU
Overview
Overview
The 120AD-00100RCU Baratron® High Accuracy Heated Differential Capacitance Manometer has an integrated signal conditioner and is temperature controlled to 45°C for 100 Torr full scale pressure measurement at ±0.05% unidirectional accuracy of reading. It is equipped with a Swagelok® 4 VCR® female fitting.
Technical Specs
- Full Scale Range100 Torr
- Sensor Temperature45°C
- Fitting Type4 VCR female
- Accuracy±0.05% of Reading Unidirectional
- Resolution1 x 10-6 of Full Scale
- Output Signal0 - 10 VDC into >10 kOhm load
- Electrical Connector25-pin type D, male
- Zero Temperature Coefficient12 ppm/°C
- Span Temperature Coefficient100 ppm/°C
- Operating Temperature15 - 40°C
- Maximum Line PressurekPa (150 psig)
- Exposed MaterialsMeasurement (Px): Inconel, 304 & 316 stainless steel, Reference (Pr): Inconel, 304 & 316 stainless steel, ceramic, Palladium Palladium
- Px Overpressure125% of Full Scale or 35 psig whichever is larger: Pr>Px: 125% of Full Scale
- VolumeMeasurement (Px): 3.5 cc, 14 cc, Reference (Pr):25.0 cc, 8.0 cc
- Response Time<40 msec
- Warm-up Time4 hours
- Power Requirements±15 or +24 to 30 VDC @ 700 mA, on turn-on,450 mA after warm-up
- Range Multiplierx1 or x0.1 ranges selectable via TTL, low or pin grounding
- Remote Zero AdjustZero adjust initiated via TTL low or pin grounding adjustment range: 2% of Full Scale
Technical Specs
- Full Scale Range100 Torr
- Sensor Temperature45°C
- Fitting Type4 VCR female
- Accuracy±0.05% of Reading Unidirectional
- Resolution1 x 10-6 of Full Scale
- Output Signal0 - 10 VDC into >10 kOhm load
- Electrical Connector25-pin type D, male
- Zero Temperature Coefficient12 ppm/°C
- Span Temperature Coefficient100 ppm/°C
- Operating Temperature15 - 40°C
- Maximum Line PressurekPa (150 psig)
- Exposed MaterialsMeasurement (Px): Inconel, 304 & 316 stainless steel, Reference (Pr): Inconel, 304 & 316 stainless steel, ceramic, Palladium Palladium
- Px Overpressure125% of Full Scale or 35 psig whichever is larger: Pr>Px: 125% of Full Scale
- VolumeMeasurement (Px): 3.5 cc, 14 cc, Reference (Pr):25.0 cc, 8.0 cc
- Response Time<40 msec
- Warm-up Time4 hours
- Power Requirements±15 or +24 to 30 VDC @ 700 mA, on turn-on,450 mA after warm-up
- Range Multiplierx1 or x0.1 ranges selectable via TTL, low or pin grounding
- Remote Zero AdjustZero adjust initiated via TTL low or pin grounding adjustment range: 2% of Full Scale