Digital IO Module, 12 Source Inputs, 12 Source Outputs, 24 VDC Logic
Model:
AS11893G-02
Digital IO Module, 12 Source Inputs, 12 Source Outputs, 24 VDC Logic
Digital IO Module, 12 Source Inputs, 12 Source Outputs, 24 VDC Logic
Model:
AS11893G-02
Compare
Add to List
AS11893G-02 Digital IO Module, 12 Source Inputs, 12 Source Outputs, 24 VDC Logic $458
Continue Shopping
View
All Saved Lists
Overview
The AS11893G-02 Digital Input/Output module provides a compact and high density solution for integrating 12 digital source input channels and 12 digital source output channels with 24 VDC logic levels to MKS PAC or CM modules.
Technical Specs
Type
Digital Input/Output Module
Number of Inputs
12
Input Type
Sink or Source
Number of Outputs
12
I/O Range
0 - 20 Volts, Source
Power Consumption
@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
Input Isolation
2.5 kVrms
DI refresh rate
10 µs or 1 ms
Debounce Filter
Fixed to 4 cycles of DI Refresh Rate (10.8 µsec)
Logic Level
24 VDC (8 - 30 VDC)
Maximum update rate
25 µSec
Output Type
Open collector sink/source
Protection
ESD to IEC 61000-4-2 ±4k V contact, short to +24 VDC, 24 V inductive load switching (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24 VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25 mA (10.7 V)
Sink Input Current, Minimum ON
3.3 mA (4.5 V)
Sink Input Current, Maximum ON
4.7 mA
Sink Output Maximum thermal current limit (ON)
2 A per bank of 6
Sink Output Maximum Available Current Sink (ON)
200 mA
Sink Output Maximum Leakage Current (OFF)
0.1 mA (output tied to 24 v)
Sink Output Maximum Voltage Drop (ON)
Maximum 1.1 v @ 200 mA
Sink Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Sink Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Source Input Logic level
24 V
Source Input High Voltage Range OFF
12.8 V (2.15 mA)
Source Input Low Voltage Range ON
15 V (2.5 mA)
Source Input Input Current, Maximum ON
4.7 mA
Source Input Nominal Load Impedance
6 kOhm
Source Output High Voltage
Minimum 23.7 V @ 200 mA
Source Output Maximum Available Current Source (ON)
200 mA
Source Output Maximum Thermal Current Limit (ON)
2 A per bank of 6
Source Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Operating Temperature
0 - 55°C, with 2°C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40 - 85°C
Altitude
0-10,000 ft above sea level
Humidity
5 - 85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
Mounting
DIN rail
Technical Specs
Type
Digital Input/Output Module
Number of Inputs
12
Input Type
Sink or Source
Number of Outputs
12
I/O Range
0 - 20 Volts, Source
Power Consumption
@ 200mA = 24 V_IO@ 2.5 Amp, 24 V_CORE@ 0.15 Amp (per module) Assuming all DOs are loaded
Input Isolation
2.5 kVrms
DI refresh rate
10 µs or 1 ms
Debounce Filter
Fixed to 4 cycles of DI Refresh Rate (10.8 µsec)
Logic Level
24 VDC (8 - 30 VDC)
Maximum update rate
25 µSec
Output Type
Open collector sink/source
Protection
ESD to IEC 61000-4-2 ±4k V contact, short to +24 VDC, 24 V inductive load switching (each channel)
Pull Up/Down Value
22K
Sink Input Logic Level
24 VDC ±5%
Sink Input Nominal Load Impedance
6 kOhm
Sink Input Current, Maximum OFF
2.25 mA (10.7 V)
Sink Input Current, Minimum ON
3.3 mA (4.5 V)
Sink Input Current, Maximum ON
4.7 mA
Sink Output Maximum thermal current limit (ON)
2 A per bank of 6
Sink Output Maximum Available Current Sink (ON)
200 mA
Sink Output Maximum Leakage Current (OFF)
0.1 mA (output tied to 24 v)
Sink Output Maximum Voltage Drop (ON)
Maximum 1.1 v @ 200 mA
Sink Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Sink Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Source Input Logic level
24 V
Source Input High Voltage Range OFF
12.8 V (2.15 mA)
Source Input Low Voltage Range ON
15 V (2.5 mA)
Source Input Input Current, Maximum ON
4.7 mA
Source Input Nominal Load Impedance
6 kOhm
Source Output High Voltage
Minimum 23.7 V @ 200 mA
Source Output Maximum Available Current Source (ON)
200 mA
Source Output Maximum Thermal Current Limit (ON)
2 A per bank of 6
Source Output Minimum Thermal Current Limit (ON)
1 A per bank of 6
Source Output Maximum Inductive Load Energy, 1Hz Cycled
60 mJ
Operating Temperature
0 - 55°C, with 2°C upper limit reduction per 1000 ft above sea level
Storage Temperature
-40 - 85°C
Altitude
0-10,000 ft above sea level
Humidity
5 - 85% non-condensing
Dimensions
35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
Mounting
DIN rail
Additional drawings are not available for this product.
Enter your email address below to reset your account password.
Remove this product from your comparison list?
Provide an order number and postal code to check the status of an order or download an invoice for an order that has shipped. Login to view your complete order history.
To access this and other valuable technical resources, please sign in or register for a new online account.
Also available on Newport.com
VAT ID has invalid format. It will not be saved with the order when submitted.
Digital IO Module, 12 Source Inputs, 12 Source Outputs, 24 VDC Logic