Sorry, this family of products is no longer available.

MultiTherm™ 2000 Temperature Controller

This product is no longer available. Contact MKS Applications Support for more information.

MultiTherm™ 2000 Modular Temperature Controller provides a modular architecture based on the MKS Automation Platform for temperature control that can be easily configured for single zone or multi-zone temperature control applications. MultiTherm™ 2000 Controller can be used as a standalone temperature controller or it can be easily integrated with a PLC or control system, with support for standard fieldbus and control networks, such as EtherCAT® or Modbus TCP/IP.

See All Features

Specifications

Type
Modular Temperature Controller
Dimensions
85 mm high (4.9 inches) x 124 mm deep (3.3 inches) x 35 mm wide (1.4 inches)
Network Protocol
TCP/IP, ModbusTCP EtherCAT® Slave supporting PDO and Mailbox (CoE and FoE) Serial 115,200 baud rate - Shell command interface (not available currently)
Temperature Range
0 to 850°C depending on type of sensor used
Channels
8 sensor input channels supporting RTD's and Thermocouples
RTD's (PT100, PT1000, 3-wire)
T/C's (J, K, T, E, R calibrated)
per Temperature Input Module
Accuracy
±0.8°C (typical TC's excludes sensor accuracy)
±0.1°C (typical RTD's excludes sensor accuracy)
Data Acquisition Speed
10 - 625 ms (configurable)
Temperature Resolution
0.01°C

Repeatability
Better than 0.1°C depending on sensor type and temperature range
Factory Calibration
12 months typical, depending on sensor type, temperature range and required accuracy
Control Method
Control via EtherCAT Master PID with auto-tuning
Control via Modbus Master PID with auto-tuning
Open loop manual control of outputs
Model Based Control (optional)
Software
EtherCAT Configurators (i.e. TwinCAT, KPA Studio) (not supplied with product)
Mounting
DIN rail
Operating Temperature
0 to +50°C
Humidity
0-85 % RH, no condensation
Compliance
CE