Sorry, this product is no longer offered for sale. For recommended replacements see mass-flow-meters.
IE250A IP66 Rated Multi-gas, Multi-range Elastomer-sealed 100-250 slm Mass Flow Meters
Model: ie250a-mass-flow-meter
IE250A IP66 Rated Multi-gas, Multi-range Elastomer-sealed 100-250 slm Mass Flow Meters
Model: ie250a-mass-flow-meter
Overview
Overview
Technical Specs
- TypeMass Flow Meter (MFM)
- Full Scale Flow Range100-250 slm (N2 equivalent)
- Measurement Range0.1-100% of Full Scale (range on mech.)
- Fitting TypeCompatible with:
12 mm Swagelok
0.375 in. Swagelok
0.5 in. tube compression
0.5 in. compression long
0.5 in. NPT female
8 VCR male
8 VCO male
8 VCR male long
8 VCO male long
W-Seal - ConnectorProfibus (1179B Compatible)
Profibus (1480 Compatible)
PROFINET
15 pin D (Analog 0-5 VDC I/O)
15 pin D (4-20 mA I/O) - Maximum Inlet Pressure150 psig
- Burst Pressure1500 psig
- Typical Accuracy±1% of Reading (with N2 calibration gas)
- Repeatability±0.5% of Reading
- Resolution0.1% of Full Scale
- Zero Temperature Coefficient<0.05% of Full Scale/°C
- Span Temperature Coefficient<0.08% of Reading/°C
- Inlet Pressure Coefficient<0.03% of Reading/psi or less
- Warm-up Time1 hour (to within 0.2% of Full Scale of steady state performance)
- Operating Temperature10-50°C
- Storage Humidity0 to 95% relative humidity, non-condensing
- Storage Temperature-20 to 65°C (-4 to 149° F)
- External Leak Integrity<1 x 10-9
- Seal MaterialViton®
Buna
Neoprene®
EPDM
Viton (USP Class VI Compliant) - Wetted Materials316L S.S.
- Surface Finish16μ inch average Ra
- Enclosure RatingIP66
- Power Requirements+15 to +24 VDC @ (<2 watts)
- Flow Input Output SignalVoltage (0-5 VDC)
Current (4-20 mA) - Weight<3.4 lbs (1.54 kg)
- ComplianceCE
Technical Specs
- TypeMass Flow Meter (MFM)
- Full Scale Flow Range100-250 slm (N2 equivalent)
- Measurement Range0.1-100% of Full Scale (range on mech.)
- Fitting TypeCompatible with:
12 mm Swagelok
0.375 in. Swagelok
0.5 in. tube compression
0.5 in. compression long
0.5 in. NPT female
8 VCR male
8 VCO male
8 VCR male long
8 VCO male long
W-Seal - ConnectorProfibus (1179B Compatible)
Profibus (1480 Compatible)
PROFINET
15 pin D (Analog 0-5 VDC I/O)
15 pin D (4-20 mA I/O) - Maximum Inlet Pressure150 psig
- Burst Pressure1500 psig
- Typical Accuracy±1% of Reading (with N2 calibration gas)
- Repeatability±0.5% of Reading
- Resolution0.1% of Full Scale
- Zero Temperature Coefficient<0.05% of Full Scale/°C
- Span Temperature Coefficient<0.08% of Reading/°C
- Inlet Pressure Coefficient<0.03% of Reading/psi or less
- Warm-up Time1 hour (to within 0.2% of Full Scale of steady state performance)
- Operating Temperature10-50°C
- Storage Humidity0 to 95% relative humidity, non-condensing
- Storage Temperature-20 to 65°C (-4 to 149° F)
- External Leak Integrity<1 x 10-9
- Seal MaterialViton®
Buna
Neoprene®
EPDM
Viton (USP Class VI Compliant) - Wetted Materials316L S.S.
- Surface Finish16μ inch average Ra
- Enclosure RatingIP66
- Power Requirements+15 to +24 VDC @ (<2 watts)
- Flow Input Output SignalVoltage (0-5 VDC)
Current (4-20 mA) - Weight<3.4 lbs (1.54 kg)
- ComplianceCE