;********************************************************** ; File : Micronode.GSD ; Date : 12/17/03 ; Revision="V1.0" ; ; GSD File for Micronode ; MKS Instruments, CIT Product Group ; ;********************************************************** #Profibus_DP ; User-Parameter-Definition PrmText=1 Text(0)="0, +10V" Text(1)="-5V, +5V" EndPrmText ;User Parameter Data ExtUserPrmData=1 "Analog Input #1 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=2 "Analog Input #2 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=3 "Analog Input #3 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=4 "Analog Input #4 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=5 "Analog Input #5 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=6 "Analog Input #6 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ExtUserPrmData=7 "Analog Input #7 Range" Unsigned8 0 0-1 Prm_Text_Ref=1 EndExtUserPrmData ; Unit-Definition-List: GSD_Revision=1 Vendor_Name="MKS Instruments" Model_Name="Micronode Profibus Combo" Revision="1.001" Ident_Number=0x081D Protocol_Ident=0 Station_Type=0 Hardware_Release="1.001" Software_Release="1.004" 9.6_supp=1 19.2_supp=1 93.75_supp=1 187.5_supp=1 500_supp=1 1.5M_supp=1 3M_supp=1 6M_supp=1 12M_supp=1 MaxTsdr_9.6=60 MaxTsdr_19.2=60 MaxTsdr_93.75=60 MaxTsdr_187.5=60 MaxTsdr_500=100 MaxTsdr_1.5M=150 MaxTsdr_3M=250 MaxTsdr_6M=450 MaxTsdr_12M=800 Implementation_Type="SPC3" Bitmap_Device="MICRONOD" ; Slave-Specification: Freeze_Mode_supp=1 Sync_Mode_supp=1 Min_Slave_Intervall=1 Max_Diag_Data_Len=8 Modul_Offset=0 Slave_Family=3 Modular_Station=1 Max_Module=1 Max_Input_Len=204 Max_Output_Len=204 Max_Data_Len=204 ; UserPrmData: Length and Preset: ;User_Prm_Data_Len=1 ;User_Prm_Data=0x00 Max_User_Prm_Data_Len=7 ;Ext_User_Prm_Data_Const(0)= 0x00 Ext_User_Prm_Data_Ref(0)=1 Ext_User_Prm_Data_Ref(1)=2 Ext_User_Prm_Data_Ref(2)=3 Ext_User_Prm_Data_Ref(3)=4 Ext_User_Prm_Data_Ref(4)=5 Ext_User_Prm_Data_Ref(5)=6 Ext_User_Prm_Data_Ref(6)=7 ; Module-Definitions: ; **** Control Inbound and Readback Outbound **** Module="9 TX 16 RX (9,16)" 0x10,0x30,0x1D,0x27 1 EndModule